mbrb1530ct - mbrb1545ct document number: ds13015 rev. 7 - 2 1 of 4 www.diodes.com may 2011 ? diodes incorporated mbrb1530ct - mbrb1545ct 15a surface mount schottky barrier rectifier features and benefits ? guard ring die constructi on for transient protection ? low power loss, high efficiency ? high surge capability ? high current capability and low forward voltage drop ? surge overload rating to 150a peak ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? lead free finish, rohs compliant (note 1) mechanical data ? case: d 2 pak ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? tin. solderable per mil-std-202, method 208 ? polarity: see diagram ? weight: 1.7 grams (approximate) ordering information (note 2) device packaging shipping mbrb1530ct-t d 2 pak 800/tape & reel, 13-inch MBRB1535CT-T d 2 pak 800/tape & reel, 13-inch mbrb1540ct-t d 2 pak 800/tape & reel, 13-inch mbrb1545ct-t d 2 pak 800/tape & reel, 13-inch notes: 1. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied, see eu directive 2002/95/ec annex notes 2. for packaging details, visit our websit e at http://www.diodes.com/datasheets/ap02007.pdf. marking information top view mbrb15xxct = product type marking code where xx = 30, 35, 40 or 45, depending on device type = manufacturers? code marking yww = date code marking y = last digit of year (ex: 2 for 2002) ww = week code (01 to 53) pin 1 pin 3 pin 2 & 4 polarity yww mbrb15xxct
mbrb1530ct - mbrb1545ct document number: ds13015 rev. 7 - 2 2 of 4 www.diodes.com may 2011 ? diodes incorporated mbrb1530ct - mbrb1545ct maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol mbrb 1530ct mbrb 1535ct mbrb 1540ct mbrb 1545ct unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 30 35 40 45 v rms reverse voltage v r ( rms ) 21 24.5 28 31.5 v average rectified output current @ t c = 105c i o 15 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 150 a thermal characteristics characteristic symbol v alue unit typical thermal resistance junction to terminal r jt 3.0 c/w operating temperature range (note 3) v r 80% v rrm t j -65 to +150 c v r 50% v rrm 180 dc forward mode 200 storage temperature range t stg -65 to +175 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol value unit forward voltage, per element @ i f = 7.5a v fm 0.7 v voltage rate of change dv/dt 10,000 v/s peak reverse current @ t a = 25c at rated dc blocking voltage (note 4) @ t a = 100c i rm 0.1 15 ma maximum reverse recovery time (note 5) t r r 30 ns typical total capacitance (note 6) c t 250 pf notes: 3. the heat generated must be less than the thermal conductivity from junction-to-ambient: dp d /dt j < 1/r ja 4. 300s pulse width, 2% duty cycle. 5. reverse recovery test conditions: if = 0.5a, ir = 1.0a, irr = 0.25a (see figure 1). 6. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 0 4 8 12 16 20 050100 200 i, ave r a g e f o r wa r d c u r r en t (a) (av) t , case temperature (c) fig. 1 forward current derating curve c 150 0.1 1.0 10 100 0.2 0.4 0.6 0.8 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics, per element f t = 25c j
mbrb1530ct - mbrb1545ct document number: ds13015 rev. 7 - 2 3 of 4 www.diodes.com may 2011 ? diodes incorporated mbrb1530ct - mbrb1545ct 50 100 150 0 200 250 300 1 10 100 i, p eak f o r wa r d s u r g e c u r r en t (a) fsm number of cycles at 60 hz fig. 3 max non-repetitive surge current 8.3 ms single half-sine-wave 10 100 1,000 0.1 1.0 10 100 c , t o t al c a p a c i t an c e (p f ) t v , dc reverse voltage (v) fig. 4 typical total capacitance r t = 25c f = 1mhz j 0.01 0.1 1.0 10 100 0 40 80 120 i, i n s t a n t a n e o u s r eve r se c u r r e n t (ma) r percent of rated peak reverse voltage (%) fig. 5 typical reverse characteristics, per element package outline dimensions d 2 pak dim min max a 4.07 4.82 b 0.51 0.99 b1 1.15 1.77 c 0.356 0.58 c1 1.143 1.65 d 8.39 9.65 e 9.66 10.66 e 2.54 typ h 14.61 15.87 l 1.78 2.79 l1 ? 1.67 l2 ? 1.77 a 0 8 all dimensions in mm e b1 c h d l1 b l2 l c1 a e a 12 k
mbrb1530ct - mbrb1545ct document number: ds13015 rev. 7 - 2 4 of 4 www.diodes.com may 2011 ? diodes incorporated mbrb1530ct - mbrb1545ct suggested pad layout important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2011, diodes incorporated www.diodes.com dimensions value (in mm) z 16.9 x1 1.1 x2 10.8 y1 3.5 y2 11.4 c 9.5 e1 2.5 x2 c z x1 y1 e1 y2
|
